Canna Aqua clay pebbles used as a hydroponic growing medium for herb net pots

Can You Grow Mint Hydroponically Indoors All Year Round? A Complete UK Guide

Yes, mint grows extremely well hydroponically indoors, and unlike a garden bed where its spreading roots can take over a border, a hydroponic system actually solves mint's biggest downside by containing it completely. Root a cutting in water, move it into a net pot with clay pebbles, keep the pH around 5.8 to 6.2 and the EC around 1.6 to 2.2 mS/cm, and give it 14 to 16 hours of light a day, and you can expect a usable first harvest in 4 to 6 weeks, with repeat cuttings from the same plant for months afterwards.

Why is mint such a good fit for a hydroponic system?

Mint is one of the few herbs where hydroponics is arguably the better growing method, not just a convenient alternative to soil. In open ground, mint spreads through underground runners and can colonise an entire bed within a season. The Royal Horticultural Society puts it plainly: mint plants are "vigorous, spreading plants, so are best grown in pots to keep them contained," and even potted outdoors the rhizomes can root over the rim and escape into surrounding soil.

A hydroponic net pot removes that problem entirely: no soil to spread into, and no dependence on a UK winter for a steady supply of fresh mint for cooking, tea or garnish.

How do you start mint cuttings for a hydroponic system?

Cuttings are the quickest and most reliable way to start hydroponic mint, and they cost nothing if you already have a plant or can get a stem from a friend's garden or a supermarket pot. The RHS recommends taking softwood cuttings from new shoots and notes that mint stems "root readily in water" before potting on, which is exactly the behaviour that makes it such a forgiving hydroponic candidate.

Take a cutting around 12 to 18cm long, strip the lower leaves so two or three nodes are bare, and stand it in a jar of plain water with the nodes submerged. Change the water every 4 to 5 days to keep it oxygenated. Roots typically appear within 5 to 7 days, and once they are a few centimetres long the cutting is ready to move into a net pot packed loosely with clay pebbles.

Division is the other option if you already have an established plant: the RHS describes cutting an existing rootball into smaller sections, each rinsed clean of soil and started in its own net pot with no rooting wait at all.

What pH and EC does hydroponic mint need?

Mint is not a fussy feeder compared with fruiting crops, and shares a similar nutrient appetite to other culinary herbs such as basil and parsley. Aim for a pH of 5.8 to 6.2 and an EC of around 1.6 to 2.2 mS/cm, checking both regularly rather than assuming they hold steady, since pH drifts and EC concentrates as the plant drinks water faster than it takes up nutrients.

Keep the reservoir water temperature steady, ideally between 18 and 22°C. Mint tolerates a wide range, but a warm, stagnant reservoir is the fastest way to invite root problems, so change or top up the solution on a regular schedule rather than letting it sit for weeks.

How much light does indoor mint need?

Give mint 14 to 16 hours of light a day on a simple timer. A consistent schedule matters more than the exact hour count, since an irregular cycle produces leggy growth rather than the bushy habit you want for a kitchen herb. UK winter daylight on a windowsill is rarely strong or long enough on its own, so a small supplementary LED keeps growth steady through the darker months.

Water cuttings or rockwool cubes: which is the better way to start mint?

Both methods work, and the right choice mostly comes down to how many plants you want to start at once.

Method Time to root Best for Downside
Plain water cuttings 5 to 7 days One or two plants, DWC or net pot systems Needs a water change every 4 to 5 days
Rockwool cube 7 to 10 days Starting several cuttings at once, NFT systems Needs to stay evenly moist, not soaked
Division of an existing plant Instant, no rooting wait Growers who already have a mature mint plant Only possible with a donor plant to divide

For a single net pot in a DWC bucket, plain water cuttings are the simplest route in and need no extra kit. Filling an NFT channel with several mint plants calls for rockwool cubes instead, since they make it easier to get uniform, same-sized plants ready to transplant together.

What do you need to grow mint hydroponically at home?

Mint's equipment list is short. You need a way to measure your nutrient solution accurately, something inert to support the roots once a cutting has struck, and a mild, balanced feed, since mint does not need the heavy fertiliser programme that fruiting crops rely on.

Essentials pH Meter, £58.00

A digital pH meter that takes the guesswork out of keeping mint's 5.8 to 6.2 range steady. Simple to calibrate and essential for any hydroponic herb setup, not just mint.

Shop the Essentials pH Meter

Essentials EC Meter, £58.00

Pairs with the pH meter to track nutrient strength. Since mint only needs a modest 1.6 to 2.2 mS/cm, an accurate EC meter stops you accidentally overfeeding a crop that does not want it.

Shop the Essentials EC Meter

Canna Aqua Clay Pebbles, 20L, £10.95

Lightweight, reusable expanded clay pebbles for filling net pots once a mint cutting has rooted, giving roots the air and support they need without holding excess water against the stem.

Shop Canna Aqua Clay Pebbles

BioBizz Alg-A-Mic, 1L, £13.40

A seaweed-based liquid feed gentle enough for a light-feeding herb like mint, giving a mild boost to leaf growth and general vigour without the strength of a dedicated fruiting-crop nutrient line.

Shop BioBizz Alg-A-Mic

How and when do you harvest hydroponic mint?

Your first harvest is ready around 4 to 6 weeks after a cutting roots, once the plant has filled out with several sets of true leaves. Cut whole stems rather than stripping individual leaves, and leave at least 7 to 8cm of leafy stem at the base so the plant can regenerate. Harvest regularly rather than letting it grow leggy and cutting hard all at once: frequent light trims keep mint bushy, and a single plant keeps producing from the same root system for months.

What problems should you watch for with hydroponic mint?

Mint is forgiving, but a few issues are worth checking for early. Yellowing leaves or stalled growth usually point to pH drift or a feed that has become too weak, so check your meters before reaching for more fertiliser. A warm, stagnant reservoir encourages root problems, so keep the temperature steady and change the solution on schedule rather than only topping it up. Algae in an exposed reservoir is avoided by keeping light off the nutrient solution with an opaque container or a simple lid. A healthy mint plant is also known to help deter aphids and whitefly from nearby plants.

Frequently Asked Questions

Can you grow mint hydroponically without soil at all?

Yes. Mint roots readily from cuttings in plain water and transfers easily into a net pot with clay pebbles or a rockwool cube, with no soil needed at any stage.

Does hydroponic mint taste different from garden-grown mint?

Flavour comes mainly from the variety you grow (spearmint, peppermint, apple mint and so on) rather than the growing method. A well-fed, correctly lit hydroponic plant produces leaves just as aromatic as soil-grown mint.

How long does a hydroponic mint plant keep producing?

A single plant can be harvested repeatedly from the same root system for several months before vigour drops off and it is worth starting a fresh cutting.

Can I grow more than one mint variety in the same system?

Yes, as long as each variety has its own net pot. Keeping varieties separate also stops the stronger grower from crowding out a more delicate one, since vigour varies noticeably between mint types.

Do I need a grow light, or will a windowsill do?

A bright windowsill can work in summer, but UK winter daylight is usually too weak and too short to hit the 14 to 16 hour target mint needs for steady growth, so a small supplementary LED is worth adding for year-round harvests.

What is the minimum kit needed to start one mint plant hydroponically?

A net pot, some clay pebbles, a small reservoir or DWC bucket, and a pH and EC meter to keep the solution in range. A mild feed such as a seaweed-based additive covers mint's modest nutrient needs.

Already growing other herbs indoors? Our Hydroponic Herb Garden Kit UK buyer's guide compares complete kit options if you want to grow mint alongside basil, parsley or coriander in one setup.

Ready to set up your own mint cuttings? Browse DiscountHydro's full propagation range for net pots, rooting trays and everything else you need to get a cutting started.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.