Advanced Nutrients pH Perfect Grow 1 litre bottle, part of the Grow, Micro and Bloom 3-part base feed

What Is Advanced Nutrients pH Perfect, and Do You Still Need to Test pH?

Advanced Nutrients pH Perfect is a three-part base feed (Grow, Micro and Bloom) with a buffering technology built into the formula. Advanced Nutrients says it sets a pH "sweet spot" in your reservoir and holds it there for up to a week, and that nutrients stay available up to pH 8.0. So do you still need to test pH? Yes. pH Perfect can make your reservoir more forgiving and cut down on pH Up and pH Down, but the hold is a time-limited manufacturer claim that cannot account for your tap water, your plants' uptake or every top-up. A quick reading with a calibrated pH meter confirms the feed is doing what the label promises, whether you grow tomatoes, chillies, herbs or leafy greens.

What is Advanced Nutrients pH Perfect and how does it work?

pH Perfect is the name Advanced Nutrients gives to the buffering technology inside its Grow, Micro and Bloom base nutrients. Instead of being a separate additive, it sits inside the feed itself. According to the manufacturer, once you mix the three parts into water the solution settles into a pH sweet spot and stays there for up to a week, and nutrients remain available to roots up to pH 8.0.

pH Perfect is not a pH Up or pH Down product or a buffer you can add to other feeds, and the manufacturer does not publish the exact pH range it targets. That does not mean it fails, but the "one week" figure is a claim to check in your own system rather than a guarantee.

Advanced Nutrients pH Perfect Micro 1 litre bottle
Step one in every mix
Advanced Nutrients pH Perfect Micro

The nitrogen and micronutrient part of the set (NPK 2-0-0). Always goes into the water first. Also available in 5 litres at £49.90.

From £12.90 (1 litre) Shop Micro →

What do pH Perfect Grow, Micro and Bloom each do?

All three bottles are used together in equal amounts (a 1:1:1 ratio) from early growth right through flowering and fruiting. Each supplies a different nutrient balance.

Part NPK (manufacturer) Main role Mixing order DiscountHydro price
Micro 2-0-0 Nitrogen, calcium and trace elements First £12.90 (1L), £49.90 (5L)
Grow 1-0-4 Potassium-led support for leafy, vegetative growth Second £12.90 (1L), £44.90 (5L)
Bloom 1-3-4 Phosphorus and potassium for flowering and fruiting Third £12.90 (1L), £49.90 (5L)

A full 1 litre set of all three costs £38.70 at current prices. If you are comparing this to other three-part feeds, our Grow, Micro, Bloom buying guide to 3-part base feeds covers how the format works across different brands.

How do you mix pH Perfect in the right order?

Mix Micro first, then Grow, then Bloom, each added separately to the full volume of water in your reservoir. Advanced Nutrients is explicit that the three parts should never be premixed together as concentrates. Concentrates can react and drop out of solution, leaving nutrients plants cannot use.

  1. Fill your reservoir or watering can with the full volume of water first.
  2. Shake each bottle well, because the contents can settle.
  3. Measure and add Micro, then stir thoroughly.
  4. Measure and add Grow, then stir again.
  5. Measure and add Bloom, then stir a final time.
  6. Let the solution circulate for a few minutes, then take your EC and pH readings.
Advanced Nutrients pH Perfect Grow 1 litre bottle
Step two
Advanced Nutrients pH Perfect Grow

NPK 1-0-4, used at the same rate as Micro and Bloom through every stage. Also available in 5 litres at £44.90.

From £12.90 (1 litre) Shop Grow →

What is the pH Perfect feed chart?

The official chart is simple because all three parts are always dosed at the same rate. During vegetative growth the dose climbs by 1 mL per litre each week. During flowering and fruiting it holds steady.

  • Grow phase, week 1: 1 mL/L each of Micro, Grow and Bloom
  • Grow phase, week 2: 2 mL/L each
  • Grow phase, week 3: 3 mL/L each
  • Grow phase, week 4: 4 mL/L each
  • Bloom phase, weeks 1 to 7: 4 mL/L each
  • Final flush week: no base nutrients

Treat the chart as a starting point. Seedlings and light feeders such as lettuce and herbs often do better at the lower end, while hungry fruiting crops like tomatoes may handle the full rate. If EC climbs steadily between top-ups, plants are drinking more water than nutrient and you can ease the dose back.

Do you still need to test pH with pH Perfect?

Yes, and here is why. Hydroponic solutions have very little natural buffering. In research carried out at Ohio State University's Ohio Agricultural Research and Development Center, Robert Hansen reported regularly seeing nutrient solution pH shift by 1 to 2 units in a single day, and recommends checking pH at least daily, with a target of about 5.5 to 6.5 depending on the crop (Greenhouse Grower). That work did not involve pH Perfect, but it shows the kind of drift pH Perfect is designed to resist.

Several things can still push your reading around, whatever feed you use:

  • Your water. Tap water hardness varies a lot across the UK, and the minerals in hard water change how any feed behaves. Measure your starting water before you add anything.
  • Plant uptake. As roots take up nitrate and other ions at different rates, the chemistry of the reservoir changes day by day.
  • Top-ups. Adding plain water or a fresh batch of feed resets the balance.
  • Time. Even on the manufacturer's own figures, the hold lasts up to a week, not indefinitely.

A sensible routine with pH Perfect is to test pH and EC when you mix, check again every two to three days, and always test before and after a top-up. Steady readings prove the buffering works in your setup; drift gets caught before it affects your plants. For help choosing and looking after a meter, see our guide to choosing and using a pH meter for hydroponics.

Essentials pH Meter for testing hydroponic nutrient solution
Check the claim yourself
Essentials pH Meter

Stores your last 10 readings so you can track drift through the week. Water resistant (it floats if dropped), shock resistant, with auto power-off and a low battery warning.

Which growing systems does pH Perfect suit?

Advanced Nutrients designs pH Perfect for hydroponic growing media and continuous liquid-feed systems. It names aeroponics, drip irrigation, NFT, flood and drain, and deep water culture, and describes the range as safe for coco coir.

Soil is a grey area: the manufacturer's text does not explicitly confirm soil use, so check before relying on the buffering claim in compost.

Advanced Nutrients pH Perfect Bloom 1 litre bottle
Step three
Advanced Nutrients pH Perfect Bloom

NPK 1-3-4, the phosphorus and potassium part of the set, added last. Also available in 5 litres at £49.90.

From £12.90 (1 litre) Shop Bloom →

What are the most common pH Perfect mistakes?

  • Premixing the concentrates. Adding Micro, Grow and Bloom to each other before they hit the water risks precipitation. Always dilute one at a time.
  • Assuming pH is locked forever. The claimed hold is up to a week. Keep testing, especially after that window.
  • Topping up blind. Plain water dilutes the feed and can move pH either way. Test before and after.
  • Overfeeding for faster growth. The chart already tops out at 4 mL/L. More nutrient pushes EC up and stresses roots rather than speeding plants along.

Frequently asked questions

Does pH Perfect really mean I can throw away my pH meter?

No. The hold is a manufacturer claim lasting up to a week, and research shows unbuffered hydroponic solutions can shift 1 to 2 pH units in a day. A meter is the only way to confirm the buffering works in your water and system.

What order do you mix pH Perfect Grow, Micro and Bloom?

Micro first, then Grow, then Bloom. Shake each bottle, add each one separately to the full volume of water, and stir between additions. Never mix the concentrates together.

How much pH Perfect should I use per litre?

The manufacturer's chart starts at 1 mL/L of each part in the first week of growth, rises by 1 mL/L a week to 4 mL/L, and holds at 4 mL/L of each part through weeks 1 to 7 of flowering, with no base nutrients in the final flush week.

Can you use pH Perfect in coco coir?

Yes. Advanced Nutrients lists coco coir as suitable, alongside aeroponics, drip, NFT, flood and drain, and deep water culture systems.

What pH should a hydroponic reservoir be?

For most crops, around 5.5 to 6.5. The lower end of that range helps keep micronutrients such as iron available. If you are using pH Perfect, aim to see readings stay steady within that band rather than chasing an exact number.

Ready to simplify your feeding?

Browse our full range of Grow, Micro and Bloom 3-part base feeds, including pH Perfect, Future Harvest and Terra Aquatica.

Shop 3-part base feeds →

UK stock, fast dispatch and friendly advice from the DiscountHydro team.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.