Twin LED grow light strips for lighting houseplants on a shelf

What Grow Light Is Best for Houseplants in the UK?

The best grow light for most UK houseplants is a slim, low-wattage LED strip or bar mounted 20 to 30cm above the leaves and run on a timer for 12 to 14 hours a day. LEDs run cooler, last longer and use less electricity than fluorescent tubes, and the RHS is clear that ordinary household bulbs are not bright enough to grow plants. A twin set of 18W LED strips covers a typical plant shelf for around 11p a day at current UK electricity prices, which makes it one of the cheapest ways to stop leggy, pale growth through a dark British winter.

In this article

Do houseplants actually need a grow light in the UK?

Many do, especially between October and March. UK winter days are short and the light coming through a window is weak, so plants slow down, lean hard towards the glass and put out long, thin stems with small leaves. If a plant sits more than a metre or two back from a window, it may be living in far less light than it looks.

University of Illinois Extension puts typical houseplant needs into rough bands: low light at around 75 foot-candles, medium at around 150, and high or bright light at around 300. A cheap phone lux app (one foot-candle is roughly 10.8 lux) gives you a quick reading. If your shelf or corner is reading low and the plant is a medium or bright light species, a grow light will make a visible difference within a few weeks.

Signs your houseplant is short of light:

  • Stretched stems with big gaps between leaves
  • New leaves smaller than the old ones
  • Variegated plants losing their pattern and turning plain green
  • The whole plant leaning sharply towards the window
  • Little or no new growth for months

Which type of grow light is best for houseplants?

For a home, LED wins on almost every count. The RHS notes that domestic light bulbs are unsuitable for growing plants because their light intensity is not enough, and that LED lighting runs at low temperatures and is longer lasting and more energy efficient than T5 HO fluorescent tubes. High-intensity discharge lamps (metal halide or sodium) are built for grow rooms, run very hot and are overkill for a living room.

Within LED, the shape matters as much as the wattage. Houseplants usually live on shelves, sideboards and plant stands, so a long, slim LED strip that mounts under the shelf above is far more practical than a square panel designed for a grow tent. Strips spread light evenly along the full length of a shelf, sit close to the leaves without scorching them, and are easy to hide behind a shelf lip.

If you care most about how the light looks in a lived-in room, our guide to discreet plant lights for apartments covers keeping things low-key. This guide focuses on getting enough light onto the plants.

Gorilla Propagation LED Strips twin pack for houseplant shelves
Best for plant shelves
Gorilla Propagation LED Strips (Twin Pack)

Two slim aluminium LED bars wired to run from a single UK plug, with sealed end caps for humid rooms. The 90cm (2 x 18W) set suits a shelf; the 120cm (2 x 24W) set suits full-width racking.

£44.95 (90cm) / £54.95 (120cm) View strips →

How do the main options compare?

Light type Heat Running cost Best for
Ordinary household bulb Low to high Low Room lighting only, not enough intensity for plants
LED strip or bar Low Lowest per unit of light Shelves, plant stands, windowless corners
T5 HO fluorescent tube Moderate Higher than LED Existing setups; tubes last about 20,000 hours
LED panel (grow tent style) Moderate Higher overall (more watts) Large collections in a tent or plant room
HID (metal halide, sodium) Very high High Grow rooms with extraction, not homes

How far away and how long should a houseplant grow light run?

Low-wattage LED strips work best close to the leaves. Omega recommends mounting its 18W Clone LED strips 8 to 12 inches (about 20 to 30cm) above the plants and spacing parallel strips 10 to 12 inches apart, which is a sensible starting point for most slim bars. Start at the higher end, then lower the strip a few centimetres at a time if growth still looks stretched. If leaves start to look bleached or pale, move the light up or shorten the hours.

For hours, Illinois Extension advises that 14 to 16 hours of artificial light is sufficient for plants in low light, and that plants should not get more than 16 hours a day because they need a rest period. In practice:

  • Topping up a dim windowsill: 6 to 10 hours, timed to run into the evening
  • A shelf well back from a window: 12 to 14 hours
  • A windowless room or cupboard: 14 to 16 hours, never 24

Never leave a grow light on around the clock. A simple plug-in timer keeps the schedule consistent while you are at work or away, and that consistency matters more than squeezing out an extra hour. If you want to put real numbers on intensity, our explainer on PPFD and DLI shows how intensity and hours combine into a daily light total.

Grow Gadgets heavy duty 24 hour plug-in lighting timer
Set it and forget it
Heavy Duty Timer

A 24 hour plug-in lighting timer with a built-in contactor, rated to switch lights far bigger than a houseplant strip, so it will happily run your plant lights for years.

Can a grow light help with houseplant cuttings?

Yes, and this is where a small light earns its keep fastest. Winter cuttings of trailing and climbing houseplants often root slowly on a cold, dim windowsill. A clear-lidded propagator holds humidity around the cuttings, and gentle LED strips above it give them steady light without the heat that dries them out. Lift the lid daily for fresh air and remove any leaves that start to rot.

Gorilla clear plastic propagator with lid and two LED light strips
Best value for cuttings
Gorilla Propagator 56 x 36 x 22cm with 2 x 60cm LED Strips

A flexible clear propagator supplied complete with two 60cm LED strips, so you get humidity and light for houseplant cuttings in one box.

How much does a houseplant grow light cost to run?

Very little. Multiply the wattage by the hours it runs, divide by 1,000 to get kilowatt hours, then multiply by your unit rate. Ofgem's price cap for October to December 2026 puts the average Direct Debit electricity unit rate at 26.32p per kWh. So:

  • A twin set of 18W strips (36W) for 12 hours uses 0.432 kWh, about 11p a day or roughly £3.40 a month
  • The same set for 16 hours uses 0.576 kWh, about 15p a day

Check the unit rate on your own bill, as tariffs vary.

For a bigger collection, or a dedicated plant shelf you want to light more strongly, a longer, higher-output twin strip gives more coverage per plug.

Omega 18W Clone LED twin pack strip lights
Best for long shelves
Omega Clone Propagation LED (Twin Pack, 18W, 117cm)

Two 117cm strips using Samsung diodes, each rated at 18W, 36 µmol/s and 2 µmol/J, with a 120° beam angle and a rated life of up to 54,000 hours. Daisy-chain them for longer runs.

Frequently asked questions

Can I use a normal household bulb as a grow light?

No. The RHS says domestic bulbs are unsuitable for growing plants because the light intensity is not enough and they are less energy efficient. Use a light designed for plants instead.

Should I leave a grow light on 24 hours a day?

No. Plants need a dark rest period, and Illinois Extension advises no more than 16 hours of light a day. Most houseplants do well on 12 to 14 hours under a grow light.

How close should an LED strip be to my houseplants?

Around 20 to 30cm above the leaves is a good starting point for slim, low-wattage LED strips. Move it closer if growth stays stretched, and further away if leaves look pale or bleached.

Do houseplants need a grow light in summer?

Plants near a bright window usually do not. Plants in dark corners, windowless rooms or north-facing spaces often benefit all year, but you can shorten the hours in summer.

Give your houseplants a brighter winter

Browse our full range of LED grow lights, strips and lighting accessories, with next day delivery across the UK.

Shop grow lighting →

Found it cheaper? Ask us to price match.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.