Aqua Master: PH Temp Meter P50 Pro

Exclusive to G.A.S, the fully calibrated Aqua Master pH Temp Meter P50 Pro provides highly accurate readings of both pH and temperature for ultimate precision.

• IP67 waterproof rated
• Large, easy to read, digital display
• Fully calibrated
• Replaceable probes
• Calibration indicator
• 2 decimal places
• AAA batteries

How does the meter work?

1. Prior first usage – soak your pH meter in tap water for 12 hours.
2. Remove the protective cover.
3. Gently clean the electrode with distilled water and dry it off.
4. Press the On/off button to start the meter.
5. Insert the meter upright into the solution up to the edge and stir gently. Wait a few seconds for the correct value to appear on the display.
6. Press the C/F button to switch between Celsius and Fahrenheit.
7. Rinse the electrode with water after use and press the On/off button to turn off the meter.

Replacement Electrode P50

Aqua Master Replacement Electrode P50 – suitable for the pH Temp meter P50 Pro.

How to replace the electrode:

1. Properly unscrew the sealing ring in the lower part of the meter.
2. Remove the defective/old electrode by gently pulling it.
3. Carefully place the new electrode with the recess in the correct position so that the connectors properly connect and do not damage the meter or electrode.
4. Check that the rubber seal is properly placed.
5. Tightly tighten the sealing ring.
6. Calibrate the meter as described in this manual.
7. The meter is now ready for use.